[. . . ] If you experience difficulty in operating the system or reading the display, please park safely before making adjustments. 7 Please remember to wear your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. 9 To promote safety, certain functions are disabled unless the parking brake is on, and the vehicle is not in motion. [. . . ] When connecting an external component to this units REAR OUT, be sure the component is compatible with the same video systems. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. Pressing RESET lets you reset the microprocessor to its initial settings. When setting the position of the operation mode switch on this unit % Press RESET with a pen tip or other pointed instrument. Note If you reset the microprocessor, memorized broadcast stations and other information is erased, and this unit returns to its initial settings. Use and care of the remote control installing the battery Slide the tray out on the back of the remote control and insert the battery with the plus (+) and minus () poles pointing in the proper direction. This unit features three operation modes: SRC : OSD OFF mode, SRC : OSD ON mode and STAND ALONE mode. Not using this units OSD (On Screen Display) indications in the display. Remove the battery if the remote control is not used for a month or longer. In the event of battery leakage, wipe the remote control completely clean and install a new battery. When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area. Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. STAND ALONE mode Press to display the area group setting screen (Selecting the area group on page 16). 5 POWER button SRC : OSD ON mode Press to turn the rear display on or off when the TV is not selected as a source. SRC : OSD OFF mode Press to turn the rear display on or off when the TV is not selected as a source. This units supplied remote control is mainly for use by rear seat passengers. 1 CH CALL button SRC : OSD ON mode When the TV is selected as a source, or, when the rear TV is on and the TV is not selected as a source: Channel information is displayed on the front and rear display. SRC : OSD OFF mode When the TV is selected as a source, or, when the rear TV is on and the TV is not selected as a source: Channel information is displayed on the rear display. STAND ALONE mode Press to display the current channel and other settings (Confirming current channel and other settings on page 17). When using a remote control supplied with SDV-P7, AVX-P7300DVD, XDV-P9II. [. . . ] # When the touch panel keys are not displayed, you can display them by touching the screen. # When P1P6 and P7P12 are not displayed, you can display them by touching LIST. # You can also perform this operation by pressing and holding CH CALL on the remote control. Selecting the appropriate area group for your reception area enables reception of multiple channels. [. . . ]